We Are Little Stars Models : WE-ARE-LITTLE-STARS CLAUCIA SET 07 WALS3 - 106 - 13YO ...

How to Replace Broken Screen on Gear Fit 2

iPad repairs aren't easy, but they aren't incommunicable either. So if you lot didn't opt for AppleCare+ and an outright replacement isn't an option, replacing the screen yourself may be worth because.

Disclaimer: Every bit with any repair, iMore cannot exist held responsible for any harm y'all may do to your device. It's besides worth considering that opening up your device to perform whatever repair or modification can and will void your Apple warranty. If you don't experience comfy opening your device, don't. Employ farthermost care and circumspection when performing a repair on any device.

What yous need to perform an iPad 2 screen replacement

iMore recommends using simply quality and 18-carat parts from a reputable supplier like iFixYouri. They have quality parts, tools, and much more for all your repair needs.

• iPad 2 (Wi-Fi or 4G model)
• Replacement digitizer
• Hair dryer or heat gun
• iPad opening tool
• iPad replacement agglutinative kit
• Double zero (#00) Phillips screwdriver
• Metal spudgers
• 4-6 pry tools

Power off your iPad ii

Before performing any kind of repair on any device you should always ability it off first.

Take note of caution areas

Underneath the digitizer of the iPad are a few caution areas you want to lookout man out for. These areas take either sensitive cables or components that can exist damaged very easily. So memorize where these areas are and move extremely carefully when working around them.

Cellular antenna (3G models only)

Yous'll but need to worry most the cellular antenna if you lot've got a 3G model. If you lot've got a Wi-Fi but model, this isn't a caution area for y'all.

Along the top yous volition find the cellular antenna. It runs along both sides of the front facing camera. It can hands go attached to the agglutinative on the underside of the digitizer and pull up with it. To avoid this from happening you lot'll want to employ a pry tool to concord them down when prying around it. This ensures that it doesn't come up with the screen.

Power button cable

The power cable sits at the top right of the iPad two and can easily be knicked with a pry tool or iPad opening tool. Yous'll want to work very cautiously around it to prevent tearing it. You can see in the image how sparse information technology actually is. Taking care around it will prevent issues with the power button subsequently reassembly.

Wi-Fi antenna

The Wi-Fi antenna in the iPad 2 is located along the bottom directly to the right of the Dwelling button. Simply like the cellular antenna, it can get caught on the agglutinative and exist pryed upward with the digitizer when you lot're removing information technology. Make sure when you're working effectually this area that you are extra cautious not to tear information technology.

Digitizer cablevision

The digitizer cable is located towards the bottom left corner of the iPad well-nigh two inches up. Even though you'll be removing it and replacing it, still accept intendance non to button it too hard as it can push into the LCD and damage it or pull up on components underneath the LCD. Information technology's best to work effectually information technology.

Remove the cracked display

This is the most difficult role of performing an iPad 2 or new iPad screen replacement as the screen is held in with nothing only adhesive. We are going to take to heat it up to soften the adhesive and slowly remove it with our iPad opening tool. Make sure y'all perform this step extremely carefully and take your fourth dimension.

Make sure you have made a good mental note of the caution areas mentioned above.

1. The best identify to start is the lower left hand corner of the iPad. Use your oestrus gun to oestrus up this area. Use circular motions about an inch from the surface of the iPad and don't stay in any one expanse likewise long.

2. Now take your iPad opening tool and very carefully insert it in betwixt the digitizer and plastic frame right beneath where the digitizer cable should be. Take swell care not to push too hard or stick the pry tool under too far equally yous will nick the LCD. If the pry tool does non want to slide in easily, rut up the iPad a bit more.

3. Once you lot've got your pry tool inserted, gently rock it back and forth in order to pause the adhesive around information technology. In that location is also a cream type of adhesive that runs around the LCD that needs to break. Looking at center level yous will be able to see it dissever.

4. After a tiny section is free you tin can skid a plastic pry tool underneath it to hold it up.

5. Now move on to the next section and repeat taking care not to damage any of the caution areas we mentioned previously. Depending on how bad the iPad is cracked and where, you may have to jump effectually and heat upwards unlike areas and work your way around in opposite directions. If glass breaks, that's ok. Just make sure not to ever bend it in the direction of the LCD.

This is the longest process and the almost tedious. Take your time and make sure each area is heated thoroughly before you motion to another section or attempt to remove the digitizer.

Once yous think you lot've gotten all or almost all of the adhesive broke nosotros can pry up the digitizer.

1. Carefully lift up the right side of the digitizer in order to swing it to the left. Be careful to wath the caution areas to make sure they aren't existence pulled upward forth with the broken digitizer. If they are, break the adhesive holding them onto the screen before prying any further.

2. Once the digitizer is completely separated from the frame you lot can get ahead and cut the digitizer cable with a pair of scissors to remove information technology from the iPad. Don't throw it away only yet as we will demand a few things off of information technology in a subsequently step.

Remove the LCD associates

Before we continue any farther into cleaning out the frame, we want to get the completely exposed LCD out of the way and place it somewhere safe.

1. Remove the 4 screws in each corner of the LCD with your #00 Phillips screwdriver.

2. Use a pry tool to grab concur of the LCD forth the right side and gently lift it up only not all the fashion out as the cable is still attached.

3. With the LCD lifted with ane hand, use the other to gently pull up on the LCD cable. At that place is a tiny bit of adhesive holding information technology into the iPad. Don't pull up hard though every bit the LCD is still attached.

4. Now use your pry tool to lift up the clasp holding the cable in place and slowly back the LCD cable out of its socket.

5. Place the LCD somewhere yous know is condom until we are gear up to place it dorsum in the iPad.

Remove what is left of the old digitizer cable

1. Flip upwards the two clasps that concord the two sides of the cable in identify.

2. Slowly back the end of the digitizer cable out of the socket and discard it.

Clean out the frame of the iPad

Before moving on yous'll most likely have a lot of glass and left over agglutinative in the frame. You will demand to remove all of information technology before placing in a new assembly.

If you lot demand to, apply your heat gun in order to heat up any left over adhesive on the frame to make it easier to peel off. At that place's really no nice and tidy way to do this. Use a pry tool or metal spatula to whittle abroad the excess broken glass and adhesive.

One time yous are positive that the entire frame is free of quondam adhesive and broken glass, we can motion on.

Set up the new assembly

Y'all'll only demand to use this step if the new digitizer assembly you ordered did not come with the Home push button and camera hold pre-assembled onto the new one. If it did, skip this step and move on. If information technology didn't, proceed reading this department.

Remove the post-obit items with your pry tool off the old digitizer assembly taking care non to curve them.

• Dwelling house push bracket
• Home push
• Camera hold (located at the summit of the digitizer where the forepart facing camera would sit down underneath information technology)

Identify the Home button on the new assembly

1. Get-go by placing the actual Home push on the new assembly. Utilise the edge of the frame to brand sure it is lined up correctly and direct.

2. One time y'all've gotten the new Home button lined up correctly, flip it over to brand sure that it'southward straight in the frame. If information technology'southward not, adjust it appropriately.
3. Make sure the agglutinative is pressed down all the style and then information technology doesn't come loose.
4. At present place the Home button bracket on top of the Home button calculation more than agglutinative if y'all demand to (you probably volition). Any type of strong ii-sided adhesive will work.

5. Again, utilize the edge of the frame to make certain the bracket is lined up direct and directly over the Home button and printing down firmly.

6. Flip over the assembly and test it past pushing downwards on the Home push. If the Habitation button depresses normally like information technology should and feels okay, you've got it on correctly.

Place the camera concur on the new assembly

To put the camera hold on the new assembly, apply new agglutinative to the dorsum of it if necessary (again, information technology's recommended). Employ the top of the frame to make sure it'south lined up correctly and push button down firmly.

To make sure it's in correctly, yous can ever lay it down advisedly in the iPad frame and brand sure the top lines up without getting caught up on anything around the photographic camera hold.

Utilise new adhesive to the iPad frame

If yous have ordered a new iPad digitizer that already has the adhesive applied, you can skip this footstep.

1. Start in any corner you'd like and first carefully laying the new agglutinative around the edge of the screen. Pre-cut strips piece of work the best but you lot may cutting your own as well.
2. Make sure you don't encompass up whatever components around the Home push area that shouldn't be covered. Too have intendance effectually wires so you don't nick or comprehend them in adhesive.
3. Once you're done applying the new adhesive, don't pare off the bankroll of information technology just yet.

Attach the new digitizer assembly

1. Once yous've gotten the new associates prepare to go we can attach it to the iPad.
2. Carefully insert the two ends of the digitizer cable into the socket you removed the old one from. In gild to get the cable to fit correctly, office of the cable will need to be tucked underneath the metal frame.

3. Most replacement cables will have white lines on each side. Make sure the digitizer cable is pushed in to or a trivial by the white lines or the touch screen may not fully answer.
4. Once y'all're sure the cable is pushed in all the way you tin use your pry tool to snap back down the clips that hold it in place.

Replace the LCD assembly

1. Just similar you lot attached the digitizer assembly, carefully re-attach the LCD associates in the same way.
2. Make sure the cable is pushed all the fashion in. Once information technology is, fasten the prune that holds it into place.

3. Lay the LCD into identify carefully and supervene upon the 4 screws around the edge of the LCD.

Test the digitizer associates

Earlier peeling off the bankroll to the adhesive, now is a perfect time to test the assembly instead of waiting until you've stuck downwards the screen with adhesive before realizing it'southward lacking.

Gently flip over the digitizer and power on the iPad. Once the slide to unlock screen comes up, go ahead and slide your finger to unlock to make sure the screen responds to touch on. Tab through the Home screens for a minute to brand sure everything is working similar normal.

If everything is in skilful shape, go ahead and agree down the ability button and slide to power off again.

If you had issues, double-check the digitizer cablevision over again making absolutely sure it's all the way in place and secured. If you lot still have no touch on capability, you may take a defective unit and need to transport it dorsum. This is very uncommon if you've used a good supplier that offers quality parts. Information technology does happen from time to fourth dimension though. If this is the case, identify your iPad somewhere safe until the supplier sends yous a new replacement digitizer assembly.

Remove adhesive backing, protective shields, and secure the new digitizer

This part can exist a bit tricky as well and so make sure you're careful and that you lot lay the digitizer down very advisedly.

1. Pull the bankroll off all the adhesive taking care around the digitizer cable and making certain that the cable doesn't become stuck. Now remove the protective backing off the inside of the digitizer that protects the screen from getting grit on the within.
2. Advisedly flip the digitizer into place making certain that you are lining upwardly the frame at the top and the bottom. Pay specific attending around the front-facing camera and by the bottom around the Home push button. Test the Home push button and brand sure it depresses ok and look at the front-facing camera to make sure it'southward lined up correctly.
3. Continue working your way effectually the frame gently pushing it into place.
4. The bottom left corner where the digitizer cable sits may need a bit of extra pressure to make sure it secures over the cablevision.
5. Once you're satisfied with how the digitizer is sitting, pull out your rut gun and gently estrus around the frame one concluding time.
6. Use a cleaning fabric and then you don't burn your fingers and slowly work your way effectually the frame applying fifty-fifty pressure in each section to secure the digitizer to the frame. I'd recommend heating upwards pocket-sized portions at a time and holding each department down for 30 seconds until you've fabricated your way around the entire iPad.

And ...washed!

Once you've made sure the digitizer is secure you can go ahead and ability on your iPad 2. If all was done correctly, you should now have a working iPad 2 again without a shattered screen.

This ranks as i of the hardest most ninja level iOS device DIY repairs then if you lot succeeded, give yourself a huge pat on the dorsum. The good news is, if you performed this repair with great results, you shouldn't have whatever event performing any other iPhone or iPod touch repair in the future.

More than DIY help and how to's

If you run into bug with this repair or need additional input or assistance, our modernistic and DIY repair forums are a corking identify to start.

DOWNLOAD HERE

How to Replace Broken Screen on Gear Fit 2 UPDATED

Posted by: janettheateran.blogspot.com